ENGLISH / A-3

CAUTIONS AND WARNINGS

SYMBOLS

Nilfisk-Advance uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.

DANGER!

Is used to warn of immediate hazards that will cause severe personal injury or death.

WARNING!

Is used to call attention to a situation that could cause severe personal injury.

CAUTION!

Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property. Read all instructions before using.

GENERAL SAFETY INSTRUCTIONS

Specific Cautions and Warnings are included to warn you of potential danger of machine damage or bodily harm.

WARNING!

*This machine shall be used only by properly trained and authorized persons.

*While on ramps or inclines, avoid sudden stops when loaded. Avoid abrupt sharp turns. Use low speed down hills. Clean only while ascending (driving up) the ramp.

*Keep sparks, flame and smoking materials away from batteries. Explosive gases are vented during normal operation.

*Charging the batteries produces highly explosive hydrogen gas. Charge batteries only in well-ventilated areas, away from open flame. Do not smoke while charging the batteries.

*Remove all jewelry when working near electrical components.

*Turn the key switch off (O) and disconnect the batteries before servicing electrical components.

*Never work under a machine without safety blocks or stands to support the machine.

*Do not dispense flammable cleaning agents, operate the machine on or near these agents, or operate in areas where flammable liquids exist.

*Do not clean this machine with a pressure washer.

*Only use the brushes provided with the appliance or those specified in the instruction manual. The use of other brushes may impair safety.

CAUTION!

*This machine is not approved for use on public paths or roads.

*This machine is not suitable for picking up hazardous dust.

*Do not use scarifier discs and grinding stones. Nilfisk-Advance will not be held responsible for any damage to floor surfaces caused by scarifiers or grinding stones (can also cause damage to the brush drive system).

*When operating this machine, ensure that third parties, particularly children, are not endangered.

*Before performing any service function, carefully read all instructions pertaining to that function.

*Do not leave the machine unattended without first turning the key switch off (O), removing the key and applying the parking brake.

*Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.

*Take precautions to prevent hair, jewelry, or loose clothing from becoming caught in moving parts.

*Use caution when moving this machine in below freezing temperature conditions. Any water in the solution, recovery or detergent tanks or in the hose lines could freeze, causing damage to valves and fittings. Flush with windshield washer fluid.

*The batteries must be removed from the machine before the machine is scrapped. The disposal of the batteries should be safely done in accordance with your local environmental regulations.

*Do not use on surfaces having a gradient exceeding that marked on the machine.

*All doors and covers are to be positioned as indicated in the instruction manual before using the machine.

SAVE THESE INSTRUCTIONS

revised 10/06

FORM NO. 56041554 - Advenger, AdvengerAXP / BR 600S series - A-3

Page 3
Image 3
Nilfisk-Advance America BR 600S Series manual Symbols, English / A-3

BR 600S Series specifications

The Nilfisk-Advance America BR 600S Series is a remarkable line of ride-on scrubber-dryers designed to enhance cleaning efficiency in a variety of commercial settings. This series combines user-friendly operation with advanced technology to deliver superior cleaning performance for medium to large areas such as warehouses, retail spaces, and industrial facilities.

One of the most prominent features of the BR 600S Series is its innovative scrubbing system. The scrubber utilizes a dual brush design that efficiently covers larger surface areas, providing thorough cleaning and a consistent finish. The machine’s adjustable brush pressure allows operators to customize the scrubbing intensity based on the specific type of flooring, ensuring optimal results whether cleaning hard surfaces or more delicate materials.

Equipped with advanced water management technology, the BR 600S Series optimizes water usage while maintaining effective cleaning. The machine features a unique solution control system that ensures the right amount of water and cleaning solution is applied at all times. This not only reduces water consumption but also minimizes detergent waste, making the machine environmentally friendly and cost-effective.

The BR 600S Series is powered by a high-performance battery system, providing extended runtimes and reducing the need for frequent recharging. The inclusion of an onboard charger simplifies operation, allowing for quick and convenient charging between cleaning tasks. This makes the BR 600S ideal for busy environments that require minimal downtime.

Safety and comfort are paramount in the design of the BR 600S. The spacious operator compartment is ergonomically designed for ease of use, featuring intuitive controls that get operators up and running quickly. The low noise level of the machine also ensures that cleaning can take place during business hours without disrupting operations.

In addition to its performance features, the BR 600S Series emphasizes reliability and durability. Built with high-quality materials, these scrubbers are designed to withstand the rigors of daily use in challenging conditions, thus reducing maintenance costs and extending the lifespan of the machine.

Overall, the Nilfisk-Advance America BR 600S Series stands out in the market for its combination of advanced technology, enhanced cleaning efficiency, and user-friendly design, making it an ideal choice for facilities looking to elevate their cleaning operations.