PLEASE READ THESE ESSENTIAL INSTRUCTIONS
(Only applicable to UK)
GD 930/S2 are designed, developed and rigo- rously tested to function efficiently and safely when properly maintained and used in accor- dance with the following instructions. These instructions have been prepared with safety and efficiency paramount.
The MACHINE OPERATOR must be trained by a suitably qualified instructor, and be made aware of the relevant regulations and legislation currently in force at the time of use.
CAUTION - This machine MUST NOT be used in explosive or inflammable atmospheres or where such atmospheres are likely to be produced by the presence of volatile liquid or inflammable gas or vapour.
CAUTION - In no circumstances should the power supply cord be wrapped around fingers or any part of the operators person.
CAUTION - The electrical supply plug must not be subjected to undue stress by pulling on the power supply cord.
Your MACHINE must only be connected to an elec- trical supply of the same voltage and frequency as indicated on the rating plate. Ensure that the plug fitted to the end of the power supply cord is suitable for your supply socket, if not refer to the information contained in 'Electrical Connections', or consult a qualified electrician. The electrical installation from which the supply is drawn must be maintained to current Institute of Electrical Engineers wiring re- gulations.
REGULAR SERVICING and INSPECTION of your machine must be carried out by suitably qualified personnel in accordance with relevant legislation and regulations. In particular, electrical tests for earth continuity, insulation resistance, and condition of the flexible cord should be checked frequently. In the event of any defect the machine MUST be withdrawn from service, completely checked and repaired.
Trained Service Engineers will be pleased to carry out on site servicing on a regular or as requested basis, to ensure the continuing safety and efficiency of your machine.
8
822 9393 000 Instruction for use GD 930 EU.indd 8 |
