Nilfisk-Advance America HSC 585 Inspection, Cleaning Solutions, Maintenance, Purchase Date

Models: HSC 585

1 13
Download 13 pages 56.96 Kb
Page 3
Image 3
INSPECTION:

INSPECTION:

Carefully unpack and inspect your HSC 585-MULTI for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

Select a proper pre-spray for the surface to be cleaned, and apply the pre-spray. Use a neutral pH rinse or detergent (6 to 9 pH) in the HSC 585 to prevent premature wear of the pump, seals and other components. Powdered chemicals are not recommended.

MAINTENANCE:

For optimum performance, flush the machine with clear water at the end of each working day. Once a month, minimum, run a flushing compound through the machine to break up any mineral or chemical build-up that may have formed in the lines, the pumps, or the heater. The vacuum motor, pump motor, and the pump do not require any scheduled maintenance; however, the vacuum motors may require replacement brushes after 1000 - 1500 hours, and the high pressure pump and unloader valve may require rebuild kits after 500 -1000 hours (refer to machine part list for numbers). Clean the body with an all purpose detergent, and protect it with an automobile interior polish. Lubricate the wheels, castors, and quick disconnects with an all- purpose silicone spray.

NOTE: to remove the complete reel with hoses from the machine, pull the vacuum hose loose from the hose barb on the front of the tank, and push the short piece of vacuum hose into the center of the hose spool. Disconnect the solution hose quick coupling. Grasp the spool from either side, and lift it off the machine.

NOTE: before servicing any component in the base cabinet, remove the hoses and spool before opening the tanks.

Record the serial number and model of your new extractor here:

Model: HSC 585-Multi_ Serial Number: __________________

Purchase Date:_____________

Write the name and phone number of your distributor:

_____________________________________

_____________________________________

11600205211REVA

-3-

Page 3
Image 3
Nilfisk-Advance America HSC 585 operating instructions Inspection, Cleaning Solutions, Maintenance, Purchase Date