Assembly

1Pull upward on the recessed handle molded into the hopper and lift the hopper off the machine.

2Packed inside the hopper are all items needed for the complete machine assembly, belt, side broom, side broom arm assembly and hardware package (excluding the handle that is packed separately).

3Mount the handle to the chassis by lining up the holes in both parts (Figure 1) and secure with the (4) 5/16-18x3-1/4" “A” bolts and (4) “B” thumb nuts from the hardware package.

4Lift the right rear wheel off the floor and position the belt around the pulley on the inside of the rear wheel.

5Pull the belt forward through the U shaped opening of the side broom mount bracket “C” (Figure 1) and twist the belt a 1/4 turn counter clockwise (Figure 2).

NOTE: The part of the belt from the top of the rear wheel will move away from the machine.

6Grip in one hand the side broom arm assembly “D” and place the belt around the pulley “E”, then attach the arm assembly to the chasses mount bracket aligning the pins inside the holes and secure using the 1/4-20 x 1/2" screw “F” as shown in Figure 1.

7Route the belt between the (2) “G” white plastic pulleys, as shown in Figure 2.

8Install the bumper disc “H” and side broom “I” to the side broom arm as shown using the (3) 1/4-20 x 3/4" “J” screws from the hardware package (Figure 1).

9Lower the side broom arm and adjust the hand crank “K” so that about 1/3 of the bristles are touching the floor.

10The belt tension adjustment is made by loosening the broom spindle bolt “L” and nut “M” and then pushing the broom forward as far as the belt will allow and tighten (Figure 2).

Ensamblaje

1Levantar el depósito de la máquina tirando del asa.

2Dentro del depósito se encuentran todas las piezas necesarias para el completo ensamblaje de la máquina: la correa, el cepillo lateral, el brazo del cepillo lateral y el paquete de tornillería (el asa va empaquetada por separado).

3Montar el asa al chasis alineando los orificios de ambos lados (Figura 1) y fíjarla con los (4) tornillos 5/16-18x3-1/4" “A” y las (4) tuercas de mariposa “B” del paquete de tornilleriá.

4Levantar del suelo la rueda trasera derecha y colocar la correa alrededor de la polea situada en la parte interna de esta rueda.

5Pasar la correa través de la abertura en forma de ‘U’ del soporte del cepillo lateral “C” montado en el chasis (Figura 1) y torcer la correa un 1/4 de vuelta en sentido contrario a las agujas del reloj. (Figura 2).

NOTA: La parte de la correa situada en la parte superior de la rueda trasera se alejará de la máquina.

6Sujetar con una mano el brazo “D” y colocar la correa alrededor de la polea “E”. Luego acoplar el brazo al soporte del chasis alineando los pasadores dentro de sus orificios y fijarlos con el tornillo 1/4-20x1/2" “F” como muestra la Figura 1.

7Colocar la correa entre las (2) poleas de plástico blanco “G”, como muestra la Figura 2.

8Instalar el disco amortiguador “H” y el cepillo lateral “I” en el brazo del cepillo lateral usando los tornillos (3) 1/4-20x3/4" “J” del paquete de tornilleriá. (Ver Figura 1).

9Bajar el brazo del cepillo lateral y ajustar la manivela manual “K” hasta que 1/3 de las cerdas toquen el suelo.

10El ajuste de tensión de la correa se realiza aflojando el tornillo-eje “L” y la tuerca “M” y tirando del cepillo hacia afuera tanto como lo permita la correa y apretando la tuerca al final. (Figura 2).

4

Page 4 Page 6
Page 5
Image 5
Nilfisk-Advance America SW 650 manual do utilizador Assembly, Ensamblaje
Page 4 Page 6

SW 650 specifications

The Nilfisk-Advance America SW 650 is a top-of-the-line walk-behind scrubber designed to cater to the diverse cleaning needs of commercial and industrial environments. This machine is a staple for facility managers who prioritize efficiency, performance, and reliability. The SW 650 stands out in the market for its unique set of features and advanced technologies, making it a popular choice for a wide range of applications.

One of the main features of the SW 650 is its compact size, which allows for easy navigation in tight spaces. Despite its small footprint, the scrubber offers excellent cleaning coverage, making it suitable for medium to large areas. The machine is equipped with a robust cleaning system that utilizes dual counter-rotating brushes, enhancing dirt and grime removal from various floor types. This technology ensures thorough cleaning while also extending the life of the brushes.

The SW 650 is designed with operator comfort in mind. It features an ergonomic handle that can be easily adjusted to suit the user's height, reducing strain during operation. The intuitive control panel provides easy access to various settings, allowing operators to customize cleaning parameters based on specific requirements. Its low noise level is another notable characteristic, enabling cleaning operations in noise-sensitive environments such as hospitals or schools.

In terms of technology, the SW 650 incorporates advanced water management systems. It includes a smart flow system that optimizes water usage, ensuring minimal wastage while achieving maximum cleaning efficiency. Additionally, the machine's eco-friendly design promotes sustainability, with options for chemical-free cleaning through the use of appropriate pads and brushes.

The SW 650 also features reliable battery technology, offering extended runtimes to keep cleaning operations uninterrupted. Its quick-change battery system allows for rapid exchanges, ensuring the machine is always ready for use. Furthermore, the scrubber's durable construction ensures longevity, providing a valuable return on investment for businesses.

Overall, the Nilfisk-Advance America SW 650 is a versatile cleaning machine that combines advanced technology with user-friendly features, making it an ideal choice for any facility looking to maintain clean and safe environments efficiently. Its focus on performance and sustainability sets it apart as a leader in commercial cleaning solutions.
Top Page Image Contents