Nilfisk-ALTO ATTIX 791-2M/B1 Connecting electrical appliances, Switch position „auto

ATTIX 791-2M/B1

4.1.3Connecting electrical appliances

To comply with regulations, only ap- proved dust producing tools should be connected.

The maximum power consumption of the connected power tool is stat- ed in section 9.4 “Technical data”.

1.Ensure that the electrical appliance is switched off.

2.Connect the electrical appli- ance to the appliance socket on the control panel.

4.2Switching on the

vacuum cleaner 4.2.1 Switch position “I”

The hose diameter and the setting for the suction hose diameter must be the same.

Hose	Hose diameter
ø	setting
ø27	ø27
ø32	ø32
ø36	ø36
ø50	ø50

4.2.2 Switch position „auto“

The hose diameter and the setting for the suction hose diameter must be the same.

Hose	Hose diameter
ø	setting
ø27	ø27
ø32	ø32
ø36	ø36
ø50	ø50

4.2.3 Suction power control

	2	0
03		3
		6
7		0
2		5
0		0

	2	0
03		3
		6
7		0
2		5
0		0

	2	0
03		3
		6
7		0
2		5
0		0

1. Turn the switch to position „I“.

The vacuum cleaner motor starts.

Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off.

1.Turn the switch to position „auto“. The vacuum cleaner mo- tor starts when the connected appliance is switched on.

2.When the power tool is switched off the vacuum cleaner contin- ues to run for a short moment so that any dust in the suction hose is conveyed to the safety filter bag.

The motor speed and the suc- tion power can be varied with the suction power control. This allows precise adaptation of the suction power for different cleaning tasks.

4.3Check volume flow monitor

Before picking up dust with maxi- mum room concentration values:

1.Check that all the filters, including the filter for supply air to the motor, are present,

properly fitted and not dam- aged.

2.When the motor is running, hold the suction hose shut. An acoustic warning sounds after approx. 1 second.

6