Nilfisk-ALTO ATTIX 791-2M/B1 operating instructions Tool socket, Maintenance, cleaning and, repair

ATTIX 791-2M/B1

Never spray water on to the upper section of the vacuum cleaner. Danger for persons,

risk or short-circuiting.

Observe the latest edition of the IEC regulations.

Tool socket	Use the socket on the vacuum			2. Switch off the appliance to
	cleaner for the purpose defined			be connected.
	in	the	operating instructions
	only.			CAUTION!
				Follow the operating instructions
	Before		plugging an appliance	and safety instructions for appli-
	into the appliance socket:			ances connected to the power
	1.	Switch off the vacuum clean-		tool socket.
		er

Maintenance, cleaning and	Only		carry	out	maintenance
repair	work described in the operating
	instructions.
	Always pull out the mains plug
	before cleaning and mainte-
	nance of the vacuum cleaner.
	During maintenance and clean-
	ing, handle the vacuum cleaner
	in such a manner that there is no
	danger for maintenance staff or
	other persons.
	In the maintenance area
	– use filtered compulsory ven-
		tilation
	–	wear protective clothing
	–	clean the		maintenance are
		so that no harmful substanc-
		es get into the surroundings.
	Before		removing		the vacuum
	cleaner from the area contami-
	nated with harmful substances:
Accessories and spare parts	Use only the brushes supplied
	with the vacuum cleaner or
	specified in the operating manu-

al. The use of other brushes can adversely affect safety.

–clean the outside of the vac- uum cleaner, wipe it clean or pack the vacuum cleaner in well sealed packaging

–and avoid spreading depos- ited harmful dust.

During maintenance and repair work all contaminated parts that could not be cleaned satisfacto- rily must be:

–packed in well sealed bags

–disposed of in a manner that complies with valid regula- tions for such waste remov- al.

A dust test must be performed at least once every year by Nilfisk- Alto service or a trained person. This test includes, for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment works properly.

Use only original Nilfisk-Alto accessories and spare parts (see section 9.5). The use of other parts can adversely affect safety.

4