920-010-05 (11-04)

The Friedrich

C-90A Electronic

Air Cleaner

The Friedrich Electronic Air Cleaner is a self-contained console model consisting of a high voltage DC power supply, electronic cell, 3 speed fan, pre-filter and activated carbon post- filter in a rugged plastic cabinet.

It is designed to remove dust, tobacco smoke,pollen, bacteria and other airborne contaminants from the air. In just minutes, you will notice improvements in your indoor air quality as your Friedrich air cleaner begins the job of removing the billions of irritating microscopic particles from your home or offi ce. The activated carbon post-fi lter also helps eliminate many objectionable indoor odors.

CAUTION: Before operating the unit

Carry unit by handle indentations on side panels or carry from base, as the top removes for filter maintenance and will not support the unit.

Remove the plastic cover from the activated carbon filter, and place the filter with label facing out.

Make sure the electronic cell is properly placed in the cabinet - airflow arrow on the end plate should be pointing toward the fan.

Make sure that the top cover is securely in place.

This unit is equipped with a three-prong (grounded) plug for your protection against shock hazards and should be plugged directly into a properly grounded three-prong receptacle.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE GROUNDING PRONG FROM THIS PLUG.

Electronic air cleaners should NOT be placed in any area where potentially dangerous gasses or vapors exist, nor should they be used in wet environments.

Pre-Filter

 

 

Ionizing Section

Collector

3-Speed Fan Carbon Filter

of Electronic Cell

Plates

3

Page 3
Image 3
Nilfisk-ALTO C-90A manual Friedrich 90A Electronic Air Cleaner