DISPLAY
ZERO RETURN
STOP
PLAY
REC
COUNTER RESET
Zero return function | Video head cleaning |
The zero return function provides a convenient method of rap- idly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by
pressing COUNTER RESET and ZERO RETURN. | |||
1 Press DISPLAY. | |||
| |||
| |||
Before playback or recording, press COUNTER | |||
2 RESET to set the counter to “00:00:00”. |
| ||
3 Begin playback or recording. | |||
| |||
4 Press STOP. | |||
| |||
5 Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position.
| Video head clogging |
|
| |
The video heads are the means by |
|
| ||
which the unit reads the picture from the |
|
| ||
tape during playback. In the unlikely |
|
| ||
event that the heads become dirty |
|
| ||
enough to be clogged, no picture will be | Good Picture |
| ||
played back. This can easily be deter- |
|
| ||
mined if, during playback of a known |
|
| ||
good tape, there is good sound, but no |
|
| ||
picture (picture is extremely snowy). If |
|
| ||
this is the case, the unit need to check |
| Playback | ||
and clear by the qualified service per- | Snowy Picture | |||
| ||||
sonnel. |
| |||
| Video head cleaning |
| (VCR) | |
|
| |||
|
| |||
Video head cleaning is needed when the playback picture | ||||
| ||||
becomes unclear. This signifies that the heads are getting dirty and can occur when playing poor quality or damaged tapes. If the heads require cleaning, use a equivalent high quality chemical
Notes:
•DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.
•Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
•To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
37
5W50101A | 37 | 2/22/06, 6:42 PM |
