Connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see 14 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

Antenna

 

jack

 

jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75 ohm coaxial cable (not supplied)

300-75 ohm matching transformer (supplied)

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

Connections

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

Connect the UHF 300 ohm twin-lead wire to the

jack

300-75 ohm matching transformer (supplied)

combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

Combiner (not supplied)

UHF 300 ohm

VHF 300 ohm

twin-lead wire

twin-lead wire

(not supplied)

(not supplied)

 

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

jack

VHF 75 ohm (not supplied)

Combiner (not supplied)

UHF 300 ohm twin-lead wire (not supplied)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack.

13

5W50101A [E]p13-17

13

2/23/06, 1:45 PM

Page 13
Image 13
Toshiba MW24F12, MW20F12 owner manual Antenna connections, Connections, Not supplied