Toshiba MW24F12 Picture control adjustment Adjusting the picture preference, Mode Picture quality

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Picture control adjustment/

Adjusting the picture preference

Picture controls are factory preset but you can adjust them individually as	ENTER
	/ / /
follows:
And also you can select four picture modes—Standard, Sports, Movie, and	CANCEL
Memory—as described in the following table:	MENU

Picture control adjustment

Press MENU, then press or to select
1 option.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 .		￿￿￿￿￿￿￿￿￿￿￿￿￿￿
Press	or	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
		to select “PICTURE”, then press
Press	or	to select the item you want to
3 adjust, then press or to adjust the setting.
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Adjusting the picture preference

Press MENU, then press	or	to select
1 option.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
Press or to select “PICTURE
2 PREFERENCE”, then press	￿￿￿￿	￿￿￿￿￿￿￿￿
	. ￿￿￿￿￿
	￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

3 Press or to select the desired picture mode, then press ENTER.

TV operation

Selection	Pressing
BRIGHTNESS	darker	lighter
CONTRAST	lower	higher
COLOR	paler	deeper
TINT	reddish	greenish
SHARPNESS	softer	sharper

Note:

The CONTRAST default setting is set to maximum (+32) at the factory.

4 After your desired setting, press MENU repeatedly until the menu screen is cleared.

3To return all adjustments to the factory preset levels Press CANCEL while making picture adjustments.

Mode Picture quality

STANDARD Standard picture quality (factory-set)

SPORTS Bright and dynamic picture (factory-set)

MOVIE Movie-like picture setting (factory-set) MEMORY Your personal preferences (set by you;

see “Picture control adjustment” as left)

After your desired setting, press MENU

4 repeatedly until the menu screen is cleared.

31

5W50101A [E]p27-32 31 2/22/06, 6:42 PM