Toshiba MW24F12, MW20F12 owner manual MPEG2 sound, Channel digital stereo

Connecting to an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Amplifier equipped with an		VHF/UHF
MPEG2 audio decoder		DIGITAL AUDIO
		• Use DVD video discs
To COAXIAL		encoded via the
	To COAXIAL DIGITAL	Dolby Digital
type digital
		recording system.
audio input	AUDIO OUT

75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with a	VHF/UHF
Digital audio input	DIGITAL AUDIO
To COAXIAL
type digital	To COAXIAL DIGITAL
audio input	AUDIO OUT

75 Ω coaxial cable (not supplied)

Notes:

•DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the unit.

•Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connections

17

5W50101A [E]p13-17 17 2/22/06, 6:41 PM