HOW TO PREPARE THE MACHINE FOR OPERATION
Assemble the Handle
Attach upper (A) and lower (B) handle to handle socket (C) by aligning holes and securing with 2 part screws (D). See figure 1.
Install the Bag Assembly
Position the bag coupling into the left bag support (A) and turn the bag knob (B) counterclockwise to secure bag to base. Attach bag spring to bag hook (C) located on the rear of the top cord hook. See figure 2.
On the Collector Cup Model, the lower handle fits through the tube on the front of the collector cup frame.
HOW TO OPERATE THE MACHINE
With power cord plugged into the proper voltage outlet, lower handle to start the vacuum. Lower handle by depressing handle release pedal at the lower left rear of the vacuum. Depress pedal again and lower handle all the way to the floor to clean under low furniture.
To stop vacuum, raise handle to upright position.
For handle positions, see figure 3.
A
D
B
D
C
Figure 1
C
B
A
Figure 2
Store
Operate
Clean Under
Figure 3
CLARKE TECHNOLOGY Symphony Upright Vacuum Operator's Manual | Page |
