![](/images/new-backgrounds/1052121/521215x1.webp)
ENGLISH / A-3
INTRODUCTION
This manual will help you get the most from your
Note: Bold numbers in parentheses indicate an item illustrated on pages
PARTS AND SERVICE
Repairs, when required, should be performed by
Call
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the right side of the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL ________________________________________________
SERIAL NUMBER _______________________________________
UNCRATING THE MACHINE
Upon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so that they can be inspected by the trucking company that delivered the machine. Contact the trucking company immediately to file a freight damage claim.
1After removing the crate, remove the wooden blocks next to the wheels.
2Check the engine oil and coolant levels.
3Check the hydraulic oil level.
4Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.
6Place a ramp next to the front end of the pallet.
7Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine forward down the ramp to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this sweeper. Be certain that you are thoroughly familiar with all of the operating instructions prior to using this sweeper. If you have any questions, contact your supervisor or your local
Should your sweeper malfunction, do not attempt to correct the problem unless your supervisor directs you to do so. Have a qualified company mechanic or an authorized
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get caught in moving parts. Turn the Key Switch (TT) OFF, remove the Key, set the Parking Brake (F) and disconnect the battery before working on the machine. Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
Drive the machine slowly on inclines. Use the Brake Pedal (F) to control machine speed while descending inclines. DO NOT turn the machine on an incline; drive straight up or down.
The maximum rated incline during transport with a 3 cylinder model is 15%. The maximum rated incline during transport with a 4 cylinder model is 24%.
*Note: Reference the separately supplied engine manufacturer’s maintenance and operator manual for more detailed engine specification and service data.
All references to 3 cylinder models apply to Advance branded models only. There are no 3 cylinder Nilfisk branded models.
revised 8/07 | FORM NO. 56041656 - Exterra™ / SR 1900 - |