ENGLISH / A-19
SIDE BROOM MAINTENANCE
To replace the Side Broom...
1See Figure 3. Raise the hopper until the side broom is approximately at chest height.
2Grab hold of the side broom with both hands and rotate until the ring end of the Hitch Pin (A1) is facing toward the rear of the hopper. NOTE: The side broom(s) will only rotate freely in one direction.
3Remove the Hitch Pin (A1) and pull the Side Broom (A2) off of the motor shaft.
4Slide the new broom onto the motor shaft, line up the pin hole and reinstall the Hitch Pin (A1).
FIGURE 3
FORM NO. 56041656 - Exterra™ / SR 1900 -
