SSE 350
1 Safety Notes
WARNING! Read these safety notes and the operating instructions before putting this machine into operation.
This machine may only be employed for its intended use, as described in the operating instructions. All covers, flaps and caps must be installed and closed in the proper manner. The machine may only be operated by persons who have been instructed in its handling and expressly entrusted with its operation.
This machine must not be operated with inflammable liquids,
Remove the plug of the mains lead from the plug socket before carrying out cleaning and maintenance work.
1Dirty water tank
2Fresh water tank
3Suction nozzle lock
4Suction nozzles
5Power cable
6Suction hoses
7
8Suction hose for fresh water
9Sealing plug
Do not pull the machine along with the mains lead and do not drive over the lead. Take care not to crush the mains lead or to drag it over sharp corners. If the mains lead is damaged, the machine must not be used until the lead has been replaced with an approved lead. Observe the protection class and type of protection.
Repairs and maintenance work may only be carried out by a person authorised by Alto or by an acknowledged organisation.
If used for trade purposes the cleaner must be subjected to a regular safety check, normally once per year. Observe the applicable national regulations! This machine is suitable for commercial operation under
Other persons or children must not be in the working area during operation.
When using cleaning fluids, a hazard can suddenly arise if these fluids are hot, under high pressure or if the fluids themselves represent a health hazard. Use only the cleaning agents approved by Alto.
A
B
CHand switch for cleaning agent pump
If either fluid or foam escapes unintentionally from the machine, switch off the machine immediately and observe the notes given in the operating instructions.
Check the filling levels at regular intervals and clean the tank as described in the operating instructions.
If attachments or accessories are used, the safety notes and operating instructions for this equipment must also be observed. Do not overload the attachment plug sockets on the machine by connecting equipment with a rating higher than the rating of the socket. Use brushes, pads and accessories only as described in the operating instructions. Failure to observe these instructions can lead to a hazardous situation arising.
This machine may only be operated on a maximum gradient of 2% unless steeper gradients are approved in the operating instructions.
Move the machine carefully on ramps and slopes. Do not change direction on slopes. Do not park the machine on slopes. When leaving the machine, remove the key and secure the machine to prevent unauthorised operation.
7
