Connecting the Mediamaster & First-time Installation
Conax smart card
The Mediamaster is equipped with a
Conax encryption system.
Insert a Conax smart card fully into the slot on the back of the
Mediamaster. The gold chip must face downwards and inwards.
Connecting a Hi-fi system
It is possible to connect a TOS link cable from the Digital audio output on the Mediamaster to a
•Also use the TOS link Digital audio output for connection to an external Dolby digital/DTS decoder.
First-time installation general information
Once you have correctly connected the Mediamaster, you will also have to perform a
The ok button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, sometimes more than one value has to be entered in a menu. Make all the necessary changes first.
Then, confirm them all simultaneously by pressing ok.
•You can always go back to the previous menu by pressing back.
•Use the cursor up/down buttons 
to move upwards and downwards from one line to another.
•Use the cursor left/right buttons 
to change settings.
•Use the number buttons on the remote control to enter numeric values.
GB 7
