Navi Bars
Maintenance folder
System Information
When you enter the Maintenance folder, you will find general information about which hardware and software version your Mediamaster is running on.
Reinstall
Only use this option if you have to start the complete installation procedure from scratch. If you continue from here, all your previous settings, access code and favourite channels, etc. will be erased.
If you do not want to reinstall, you can leave this menu when the warning is displayed by pressing "back".
SW update
Your Mediamaster will advise you from time to time of any new software upgrades using information sent by TV broadcasters through your aerial.
This will appear as a message on your TV screen asking you to press select to start the download. You are strongly advised to accept the download as this might enable you to receive new features and/or services that may be available to you. You can choose to postpone the download for a more convenient time by pressing the back button. The message will appear again provided that the software is still being broadcast.
NOTE: These messages will only appear if your Mediamaster has been switched on from Standby.
It is advisable to put your Mediamaster into standby when not in use.
After downloading a new software version, all your previous settings, access code and favourite channels, etc. will be erased.
NOTE: It may take a while to complete the update.
NEVER turn off the Mediamaster, never use the remote control or disconnect the antenna cable during the download procedure as this will damage the software and the receiver will have to be sent in for service.
GB 21