
Connecting the Mediamaster
Common connections
There are many different types of TV/VCR and other equipment that you can connect to the Mediamaster.
In this section, you will see some of the most common ways to connect your equipment.
If you have problems with your connections and need help, contact your retailer or Nokia Support.
Connecting to the TV with SCART
•Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the Mediamaster.
•Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the TV.
•Switch on your TV, then plug in and switch on your Mediamaster.
You may need to select the AV (SCART) channel on your TV to watch digital TV. In some cases, your TV will automatically select this channel when the Mediamaster is switched on.
NOTE: The RF lead will need to be connected in order to watch analogue channels (the old 1, 2, 3, 4, 5)
It is always advisable to consult the user guide that came with your TV.Connecting to the TV without SCART
•Remove the aerial lead from your TV and connect this to the TV aerial input socket on the Mediamaster.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the TV.
•Switch on your TV, plug in and switch on your Mediamaster.
•Select a programme number on the TV that is not currently used for other TV channels.
•Follow the instructions in your TV manual to tune the TV to pick up the
•Follow the instructions in your TV manual to store this channel.
•When the
If the picture quality is bad, you can later change the
GB 8
RF SCART
RF