Remote control

This section describes how to operate the Mediamaster using the buttons on the remote control.

Press once to turn the sound off/on (mute).

Press and hold for a few seconds to switch the Mediamaster into standby mode. In addition, press this button to switch the Mediamaster on.

back To go back one level at a time within menus

select To confirm the selection of a highlighted item.

info To display brief and detailed information (if transmitted) about current and forthcoming programmes

0 - 9 To change the channel and to select individual menu options. NOTE: If 0 is entered as the first digit, the TV Release functionality is activated (see below).

0To toggle between the 110 T and any equipment connected to the TV Scart; e.g., a VCR or satellite receiver.

opt To display temporary settings options while watching TV.

When a TV or Radio channel has been highlighted with the Navi Bars, press this button to get technical information about the channel.

txt

Press to enter Teletext (if available).

The cursor buttonl

Cursor up

Move up in the menus and change to the next channel in viewing mode.

Cursor left

Move left/change settings in menus. Decrease the volume level in viewing mode.

Cursor right

Move right/change settings in menus.

Increase the volume level in viewing mode.

Cursor down

Move down in the menus and change to the previous channel in viewing mode.

GB 4