Connecting the Mediamaster
The box for your Mediamaster should contain the following items:
•the Mediamaster
•a remote control with 2 AAA batteries
•a SCART cable (fully connected; 1.0 m)
•an RF cable
•a User Guide and a software license agreement
•a separate power supply
SCART cable
Remote control
RF cable
Power supply
About the SCART socket
The rear panel of the Mediamaster is equipped with a SCART socket |
|
(see picture). When you connect other devices to this socket, always |
|
use a fully connected SCART cable like the one supplied. SCART |
|
cables are available that do not have all the pins connected, which |
|
could reduce picture quality if you were to use them. | SCART socket |
Preparing the remote control
•Remove the cover from the battery compartment at the bottom of the remote control.
•Insert the 2 AAA (1.5 V) batteries as shown in the diagram, taking care to observe the + and - markings indicated inside.
•Replace the cover.
GB 6