Nokia 1220 manual Erase 1-touch dialing numbers, SET Touch Tone Strings

2Scroll to the key you want to change and press Options.

3Scroll to Change and press Select.

4Scroll through the phone book until you reach the new number you want to select and press Select.

Erase 1-touch dialing numbers

You can erase 1-touch dialing key assignments at any time.

1Press Names, scroll to 1-touch dialing and press Select.

2Scroll to the key you want to erase and press Options.

3Scroll to Erase and press Select.

4Press OK to confirm.

•SET TOUCH TONE STRINGS

Your phone allows you to create special sets of numbers known as touch tone strings which will dial a series of digits after a “wait” or a “pause.” For example, you can program your phone to send your account number while you are banking by phone.

You must be in the mode to enter these characters. Enter the numbers as usual. When you want to insert the special characters, press repeatedly to switch among *, +, p, w characters.

Note: Use caution when sending confidential information if voice privacy is not active.

pCreates a pause when a number is dialed. The numbers you enter after this special character are automatically sent as touch tones after a 2.5-second pause.

wCreates a wait when a number is dialed. This means that your phone

waits for you to press before it sends the number as touch tones.

*Sends command strings to the network. Contact your service provider for details.

+Use this character to link a 1-touch dialing number to a number in the phone book.

[ 76 ]