Manuals / Nokia / Computer Equipment / Network Card

Nokia 12 GSM MODULE REMOTE I/O manual General settings

Models: 12 GSM MODULE REMOTE I/O

1 53

Download 53 pages 21.86 Kb

Page 18

Figure 4. General settings

If you select the Disable acknowledgements option, only response messages to acknowledgement messages are disabled. The following will not be disabled:

•Status messages; responses to input state or value queries

•Indication messages, for example, responses to timed commands (see Chapter 9.3.7)

•Alarm messages; responses to alarm subscriptions (see Chapters 5.4 and 9.3.3)

•Error messages that are sent, for example, in response to a control message with the correct message identifier and password, but with the wrong command

14/49

Image 18

Nokia 12 GSM MODULE REMOTE I/O manual General settings

Contents

Nokia 12 GSM Module Contents Page Legal Notice Acronyms and Terms About this Document Remote I/O Control IntroductionGeneral Functions in the Remote I/O controlPage Security Page Setting UP the Configurator Environment Getting StartedConnecting a Device or a Machine Mandatory SettingsReading and Writing Parameters Defining the Message IdentifierUser Control Mode dialog Setting the SMS Centre Address Short Messages dialog12/49 Optional Configurations Disabling AcknowledgementsGeneral settings Security Settings Authorised numbersSecurity settings Authentication Aliasing Setting aliases for device commands Input Settings Default Output Value Setting Input settings21/49 INPUT/OUTPUT PIN Descriptions PIN descriptions Port settings in Configurator Characters supported by Configurator for Remote I/O control Supported CharactersCommand Syntax Remote I/O Control SMS Commands CommandsList of commands Status Messages Detailed Command Information and Responses Changing the PasswordList of response messages Changepword Failed Commands for the password controlReading Inputs Changepword OKINPUT1 Y InputGet X commandsInputget ALL OK Inputget X OKSubscribing to Input Alarms InputGetChange commands for alarm functionality Inputchangecancel Reading OutputsInputgetchange Z Outputget X OK OutputGet X commandsWriting Outputs Output X YOutputSet X commands OutputInvert X commands Inverting OutputsOutputinvert X OK Output X Y Output Pulses Output 7 Output 8 Output 9Output X Locked OutputPulse X commandsOutputpulse X on Outputpulse X OFFCancelling Output Pulses Output Pulse OFF time Error Network Time MissingOutputPulseCancel X commands OutputpulsecancelOutput X Pulse Cancelled Term123 Outputpulse 1 on 5s GPS support configured to serial port Location informationBbbbbbbbb Location Latitude LocationgetLocation LongitudeSafety Information Network SupportAntenna Medical DevicesVehicles Care and Maintenance Potentially Explosive Environments49/49