Nokia 12 GSM MODULE REMOTE I/O manual Bbbbbbbbb

Note: You cannot connect a GPS device to serial port 2. It is always in the M2M system protocol use.

Note: You can connect only one GPS device to the Nokia 12 GSM Module (PORT1 or PORT3).

To use GPS support, configure the GPS settings (baud rate and used NMEA parameters). See your GPS device manual for information about parameters used.

Query the location information with the Location_get command. Note that all example control messages in this chapter use the “term123” identifier string and the password property is set off (see Table 14).

Response parameters of Location_get command are:

•	AA	Latitude, degrees [0 – 90]
•	BBBBBBBBB	Latitude, minutes [0 – 59.999999]
•	C	Latitude, type [N or S]
•	DDD	Longitude, degrees [0 – 180]
•	EEEEEEEEE	Longitude, minutes [0 – 59.999999]
•	F	Longitude, type [E or W]
•	GGGG	Angle (geological) [0 – 359,9]
•	HHHH	Speed in knots [0 – 999,9]
•	II	Number of visible satellites [0 – 99]
•	JJJJJJJJ	Altitude [-99999.9 - +99999.9]
•	K	Altitude unit [M]
•	LL	UTC Time hours [00 – 23]
•	MM	UTC Time minuts [00 – 59]
•	NNNN	UTC Time seconds [00 – 59.99]
•	OO	UTC Date day [01 – 31]
•	PP	UTC Date month [01 – 12]
•	QQQQ	UTC Date year [0000 - 9999]

44/49