Manuals / Nokia / Computer Equipment / Network Card

Nokia 12 GSM MODULE REMOTE I/O manual Command Syntax

Models: 12 GSM MODULE REMOTE I/O

1 53

Download 53 pages 21.86 Kb

Page 30

8.COMMAND SYNTAX

The command syntax of control messages varies according to the activated options. There may also be spaces in aliases defined for commands as seen in the example below. However, only one space character is accepted between words. The message identifier and password are case sensitive.

Note: A control message always begins with a message identifier. Otherwise the message is not interpreted as a Remote I/O control message, and is stored in the SIM card or the Nokia 12 GSM Module memory.

Control message without a password:

<message identifier> <command / alias>

term123 Output_Set All On

Control message without a password with an alias defined:

<message identifier> <command / alias> <parameter> term123 Output_Pulse All On 1h30m

Control message with a password:

<message identifier> <password> <command / alias> term123 password Output_Set All On

Control message with a password with an alias defined:

<message identifier> <password> <command / alias> <parameter>

term123 password Output_Pulse All On 1h30m

26/49

Image 30

Nokia 12 GSM MODULE REMOTE I/O manual Command Syntax

Contents

Nokia 12 GSM Module Contents Page Legal Notice Acronyms and Terms About this Document Remote I/O Control IntroductionGeneral Functions in the Remote I/O controlPage Security Page Setting UP the Configurator Environment Getting StartedConnecting a Device or a Machine Mandatory SettingsReading and Writing Parameters Defining the Message IdentifierUser Control Mode dialog Setting the SMS Centre Address Short Messages dialog12/49 Optional Configurations Disabling AcknowledgementsGeneral settings Security Settings Authorised numbersSecurity settings Authentication Aliasing Setting aliases for device commands Input Settings Default Output Value Setting Input settings21/49 INPUT/OUTPUT PIN Descriptions PIN descriptions Port settings in Configurator Characters supported by Configurator for Remote I/O control Supported CharactersCommand Syntax Remote I/O Control SMS Commands CommandsList of commands Status Messages Detailed Command Information and Responses Changing the PasswordList of response messages Changepword Failed Commands for the password controlReading Inputs Changepword OKINPUT1 Y InputGet X commandsInputget ALL OK Inputget X OKSubscribing to Input Alarms InputGetChange commands for alarm functionality Inputchangecancel Reading OutputsInputgetchange Z Outputget X OK OutputGet X commandsWriting Outputs Output X YOutputSet X commands OutputInvert X commands Inverting OutputsOutputinvert X OK Output X Y Output Pulses Output 7 Output 8 Output 9Output X Locked OutputPulse X commandsOutputpulse X on Outputpulse X OFFCancelling Output Pulses Output Pulse OFF time Error Network Time MissingOutputPulseCancel X commands OutputpulsecancelOutput X Pulse Cancelled Term123 Outputpulse 1 on 5s GPS support configured to serial port Location informationBbbbbbbbb Location Latitude LocationgetLocation LongitudeSafety Information Network SupportAntenna Medical DevicesVehicles Care and Maintenance Potentially Explosive Environments49/49