End calls

To end a conference call, that is, to disconnect with all callers, press the End key. Or you can also press Options, then select End all calls.

Go from conference call to individual call

While all three parties are connected, pressing the Send key places the second call on hold, while keeping the first party’s call active. Pressing the Send key again will switch you to the second call, while placing the first call on hold. Pressing the Send key again will bring all parties into the call.

Disconnect one party from the conference call

If you wish to disconnect with the first party and remain connected to the second party, have the first party terminate the call on his/her end.

• SEND OWN CALLER ID WHEN CALLING

This feature allows you to block caller ID when you call someone (your number will not be displayed on their caller ID). This feature may only be effective when calling a number equipped with caller ID.

Note: This feature is available only when supported by the wireless network and may not function if you are roaming.

Important: This feature works on a call-by-call basis. You must enable this feature each time you want to block the sending of your own number to the recipient’s caller ID.

Store the feature codes

Before you can use the Send own caller ID when calling feature, you must store the feature codes for activating this feature. Once the code is stored in your phone, it is sent automatically to the network when you select this option from your phone’s menu.

1Press Menu 4-6-5 (Settings > Network services > Network feature setting).

The Feature code field appears after a few seconds.

[ 90 ]

Page 98
Image 98
Nokia 2280 manual End calls, Go from conference call to individual call, Disconnect one party from the conference call