[ 62 ]
Store touch tone strings with phone numbers
1Enter the phone number that you want associated with a touch tone.
2Press , then select
w or p where needed.
w (wait): When you dial this phone number, your phone first dials the
number, and then waits (because of the w character) for you to press
Send. When you press Send, the phone sends your touch tone.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds and then automatically sends the touch tone.
3Enter the touch tone string.
4Store the number as you normally would.
Send a touch tone string
1Press Menu 4-4-3-1 (Settings > Phone settings > Touch tones >
Manual touch tones).
2Make sure that the setting is not set to Off.
If set to off, press Scroll up or Scroll down to scroll to one of the
other options and press Select.
3During your call, press Options, scroll to Touch tones, and press Select.
4Enter the touch tone string or retrieve the string from the phone book,
and press Tones.
Warning: If you send touch tones while in the analog mode, be
careful not to send confidential information.