Nokia 6161 manual Linking phone numbers with touch tone strings

3.Enter the touch tone string (e.g. voice mailbox password)

4.Store the number as you normally would

Note: See “Special Characters (for storing numbers)” on page 39 for details on “p” and “w” characters.

When you dial this number, your phone first dials the phone number, then waits (because of the “w” charac- ter) for you to press 6HQG. Your phone then sends your password.

If you include a “p” character instead of a “w”, your phone pauses for 2.5 seconds, then automatically sends your password as touch tones.

Linking phone numbers with touch tone strings

This feature allows you to store a phone number in one phone book location and link it to another phone book location that contains a touch tone string.

First, you must first store the touch tone string into a phone book location and then assign it a one-touch dialing location (see “One-touch dialing” on page 50).

1.Enter the phone number you wish to link with the touch tone string

2.Press ∗ twice (you should have a “+” character next to the phone number)

3.Enter the one-touch dialing location where the touch tone string is stored (i.e. if the string is stored in location 2, then enter 2)

4.Press 6DYH and then enter the name that corre- sponds with the phone number (this is optional)

5.Press 2.

When you wish to call this number, make the call as you normally would. Then, when you wish to send the touch tone string, simply press 2..

68