Nokia 6190 owner manual Send own number, SIM card PIN code

Code	Purpose	For more information
Security code	Required by several phone features. If	See entries for call timers,
	phone security is on, the phone	calling card, phone book,
	requests the security code the first	and phone security.
	time you use it after installing a new
	SIM card.
PIN code	If SIM card security is on, the phone	See “SIM card security” on
	requests the PIN code every time the	page 74.
	phone is turned on.
PIN2 code	Required by several phone features.	See entries for show call
		costs, call cost limit, fixed
		dialing, and PIN and PIN2
		codes.
System password	Required by the Restrict Calls feature.	See “Restrict calls” on
		page 66.
Module code (used	If module security is on, the phone	See “Module security” on
with optional analog	requests the module code when the	page 55.
module only)	phone is turned on, the optional ana-
	log module is attached, and either (a)
	the module code has not been
	changed from the default of 12345, or
	(b) the module code has been
	changed but it is different from the
	security code.

Send own number

This is a network service that specifies whether or not you wish to display your phone number to the person you are calling. Contact your service provider for details.

Note: This feature is only effective when calling to a number that is equipped with Caller ID.

1)Press 0HQX 4 1 3 (6HWWLQJV - &DOO VHWWLQJV - 6HQG RZQ QXPEHU)

(For details on how to work the Menu, see page 13)

2)Press W to reach 3UHVHW (to use the default net- work setting), 2Q (to show your number), or 2II (to not show it) and press 2.

Note: These menu items may vary by SIM card and service provider.

If you don’t make a selection, your phone uses the default network setting. Check with your service pro- vider to find out the network default.

72