Nokia 6267 manual Insert a microSD card, Charge the battery, Remove the microSD card

■ Insert a microSD card

1. Open the memory card holder as shown.

3.Press the microSD card slightly in to release the locking.

4.Remove the microSD card from the slot.

2.Insert the card into the microSD card slot with the gold-colored contact area on the card facing upwards, and press it until it clicks into place.

3.Close the memory card holder.

Memory card is not included in sales pack.

Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

■Remove the microSD card

■Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3, AC-4, AC-5 or CA-70 charger.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

1. Connect the charger to a wall socket.

You can remove or replace the microSD card during phone operation without switching the phone off.

1.Make sure that no application is currently accessing the micro SD memory card.

2.Open the memory card holder.

2.Connect the lead from the charger to the charger connector as shown. A CA-44 charger adapter can be used with older charger models.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

2 Copyright © 2007 Nokia. All rights reserved.