Nokia 6681 Voice commands, Network, Enhancement settings, Add a voice command to an application

Network

Operator selection—SelectAutomatic to set the phone to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the phone sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your phone.

Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.

Cell info display—Select On to set the phone to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.

Enhancement settings

Indicators shown in the standby mode:

A headset, music stand, or Bluetooth wireless technology device is connected.

A loopset is connected.

A car kit is connected.

The headset is unavailable, or a Bluetooth connection to a headset is lost.

Select Headset, Carkit, Bluetooth handsfree, or Loopset and the following options are available:

Default profile—To set the profile that you want activated each time you connect a certain enhancement to your phone. See ‘Set tones’, p. 12.

Automatic answer—To set the phone to answer an incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled.

Voice commands

You can use voice commands to control your phone. You record voice commands in the same way as voice tags. See ‘Add a voice tag’, p. 28.

Press , and select Tools > Voice com.

Add a voice command to an application

You can have only one voice command per application.

Tools

Copyright © 2005 Nokia. All rights reserved. 95