G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
16.Enter *99# in Phone number box in the dialog that follows and then click Next.
17.Enter the user name and password in the dialog that follows and then click Next.
Note: Consult your network service provider for the user name and password if required.
18.Click Finish, and then click Properties in the Connect
19.Click Configure, uncheck Enable hardware flow control and then click OK.
20.Click OK to return to the Connect
Setting up GPRS Modem via USB Connection
1. Install the PC Suite for the Nokia 6708.
Note: For more information about how to install and configure PC Suite for the Nokia 6708, please refer to the users guide on the CD.
• The steps below describe the setup procedure in Windows XP.
2.Make sure that your device is switched on and the connection mode has been set to Modem (See "USB cable" on page 47).
3.Connect the USB connector on the device to a USB port on the PC using the supplied data cable.
4.On your PC, click the Start button on Windows Taskbar,
5.Click the Hardware tab and then click Device Manager.
6.
7.In the dialog that appears, click the Advanced tab.
8.Refer to the service provider’s setting to enter a command in the Extra initialization commands box, and then click OK. An example of the command is
+cgdcont=1,"ip", "APN"
Note: APN (Access Point Node) is a setting by your network service provider that tells how your data requests should be routed. Consult your network service provider for the actual APN address.
9.Click the Start button on Windows Taskbar, select Connect to, and then Show all connections. Alternatively, you can click the Start button on Windows Taskbar, go to Control Panel, and select Network Connections.
10.Click Create a new connection.
11.In the New Connection Wizard dialog, click Next.
12.Click Connect to the Internet and then Next.
13.Click Set up my connection manually and then Next.
Copyright ©2006 Nokia All right reserved | 98 |
