U s i n g t h e A p p l i c a t i o n P r o g r a m s
Accepted Callers
Accepted callers are those whose calls can reach you. Others will be automatically rejected.
1.Select from the following options in the Accept calls from
•All callers: Everyone can call you.
•All except listed callers: Everyone can call you except the ones in the rejected caller list. Tap the Add new button to add callers to the list.
•None: No one can call you.
2. Tap Done to exit.
Add to Contacts
If this function is activated, after a call has ended, if the phone number is not already stored in the Contacts application program, you will be asked if you want to add it.
1.Tap the Add party to contacts
2.Tap Done.
Auto redial
If an outgoing call is failed to connect to the network, you can choose to redial the number automatically or to be prompted to make the call again.
1.Tap Off, Auto redial, or Prompt redial in the
2.Tap Done to exit.
Call Costs
The call costs function allows you to set a limit for total call costs. If call costs exceed this limit, the device will no longer be able to dial pay calls.
Note: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding off for billing, taxes, and so forth.
•When this device is used as a GPRS modem, the GPRS log will be updated automatically.
To set up call costs:
1.Enter the price unit for calculating call cost in the Price per unit field. The value must be between 0.01 and 9999999.
2.Enter the
3.Select a Credit status: Unlimited or Limited.
4.Enter a credit limit in the Remaining credit field. The value must be between 0.01 and 9999999.
Note: The estimated value shown in the Remaining credit field is for your reference only. The real cost of calling may vary depending on the service provider the call is made through.
5.Tap Done.
6.Enter your PIN 2 code and then tap Done.
57Copyright ©2006 Nokia All right reserved
