G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
14.Click Connect using a
15.In the dialog that follows, click to choose Modem - Nokia 6708 VSC Modem (WDM) and then click Next.
16.In the dialog that follows, enter a connection name in the ISP name box, and then click Next.
17.Enter *99# in Phone number box in the dialog that follows and then click Next.
18.Enter the user name and password in the dialog that follows and then click Next.
Note: Consult your network service provider for the user name and password if required.
19.Click Finish, and then click Properties in the Connect
20.Click Configure, uncheck Enable hardware flow control and then click OK.
21.Click OK to return to the Connect
Setting up GPRS Modem via Bluetooth Connection
1.Perform step 1 through 7 in "Establishing Bluetooth Connection" on page 96 to establish Bluetooth connection.
2.On your PC, click the Start button on Windows Taskbar,
3.Click the Hardware tab and then click Device Manager.
4.
5.In the dialog that appears, click the Advanced tab.
6.Refer to the service provider’s setting to enter a command in the Extra initialization commands box, and then click OK. An example of the command is
+cgdcont=1,"ip", "APN"
Note: APN (Access Point Node) is a setting by your network service provider that tells how your data requests should be routed. Consult your network service provider for the actual APN address.
7.
8.
9.
10.Click Properties in the Connect Bluetooth Connection dialog that follows.
11.Click Configure, uncheck Enable hardware flow control and then click OK.
99Copyright ©2006 Nokia All right reserved