2. Place the card in the slot with the contact area facing down (2).
3. Push the card gently to lock it into place. Close the slot cover (3).
Remove a memory card
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
1.Press the power key briefly, and select Remove memory card > Yes.
2.Open the memory card slot cover.
3.Press the memory card gently to release it.
4.Pull the card out, and press OK.
5.Close the slot cover.
Get started
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet.
You also may charge the battery with a USB cable with power from a computer.
1.Connect the USB cable to the USB port of a computer and to your device.
2.When the battery is fully charged, disconnect the USB cable.
You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.
© 2009 Nokia. All rights reserved. | 11 |
