Nokia 6720 manual Time management, Sensor settings, Alarm clock, Clock settings

To set the profile to be active until a certain time within the next 24 hours, scroll to the profile, select Options > Timed, and set the time. When the time expires, the profile changes back to the previously active non-timed profile.

When the profile is timed, is displayed in the home screen. The Offline profile cannot be timed.

To delete a profile that you created, select Options > Delete profile. You cannot delete the predefined profiles.

Sensor settings

Mute calls or snooze alarms by turning the phone.

14. Time management

Alarm clock

Select > Settings > Clock.

To view your active and inactive alarms, open the alarms tab. To set a new alarm, select Options > New alarm. Define the

repetition, if needed. When an alarm is active,	is
displayed.

To turn off the sounding alarm, select Stop. To stop the alarm for a certain time period, select Snooze. If your device is switched off when an alarm is due, your device switches itself on and starts sounding the alarm tone.

Tip: To define the time period after which the alarm sounds again when you set it to snooze, select

Options > Settings > Alarm snooze time.

Time management

Select > Settings > Settings and General > Sensor settings.

Select from the following:

●Sensors — Activate the sensors.

●Turning control — Mute calls or snooze alarms by turning your device.

To cancel an alarm, select Options > Remove alarm. To change the time, date, and clock type settings, select Options > Settings.

Clock settings

Select Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown on the home screen, select Clock type > Analogue or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Automatic time update > On.

© 2009 Nokia. All rights reserved. 49