Nokia 8290 manual Choose a calling card

Dialing sequence	Use for cards	Cards using
	that require you to:	this sequence
Access no.	Dial the 1-800 access number,	MCI, AT&T True
+ Phone no.	then phone number, then card	Choice, Sprint
+ Card no.	number (+ PIN if required).	Canada, Unitel
Access no.	Dial the 1-800 access number,	networkMCI,
+ Card no.	then card number (+ PIN if	WorldPhone MCI
+ Phone no.	required), then phone number.
Prefix	Dial the prefix (any numbers	GTE, PacBell, AT&T,
+ Phone no.	that must precede the phone	Stentor
+ Card no.	number) and phone number
	you want to dial, then card
	number (then PIN, if required).

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

6Enter the access number (usually the 1-800 number listed on the back of the calling card), then press OK.

7Enter the card number and/or PIN, then press OK.

8Your phone displays Save changes? Press OK.

9Scroll to Card name: and press Select.

10Enter the card name, then press OK.

Choose a calling card

1Press Menu 4 4 2.

2Scroll to the card you want to use, then press Options.

3Select is highlighted; press OK.

4Enter your security code, then press OK.

[ 46 ]