PROBLEM SOLVING

Problem

Possible causes

What to do

The display on the

Mains lead is not connected.

Check that the mains lead is

front panel does not

 

plugged into the power socket.

light up/is not lit.

 

 

No sound or picture.

The satellite dish is not pointing

Adjust the dish. Check the signal

 

at the satellite.

level indicator in one of the channel

 

No signal or weak signal.

search submenus.

 

Check the cable connections, LNB

 

 

and other equipment connected

 

 

between the LNB and the receiver, or

 

The LNB is faulty.

adjust the dish.

 

Replace the LNB.

Bad picture/blocking

The satellite dish is not pointing at

Adjust the dish.

error.

the satellite.

Connect a signal attenuator to the

 

Signal too strong.

 

Satellite dish is too small.

LNB input.

 

Change to a larger dish.

 

LNB noise factor too high.

Change to an LNB with lower noise

 

The LNB is faulty.

factor.

 

Change the LNB.

 

 

 

There is no Welcome

The system is connected by

If the system is connected by SCART

menu on the screen

SCART cables and the TV is not

cables, switch the TV to the

after you switched on

in AV/EXT mode.

appropriate AV input.

the Mediamaster for

The system is connected by RF

If the system is connected by RF

the first time.

 

cables and the TV is not set to the

cables, switch the TV to the channel

 

channel tuned for digital satellite

for digital satellite TV. If you have not

 

TV.

tuned in the TV you may do this first.

 

 

Please see the TV manual for

 

 

instructions. You can also change the

 

 

RF-channel in the Mediamaster.

 

 

See TV settings.

 

 

 

There is interference

The system is connected by RF

Change the Mediamaster output

on your digital satellite

cables and the output channel of

channel to a more suitable channel

channels, an existing

the Mediamaster interferes with an

between 21-69, or connect the system

terrestrial channel or

existing terrestrial channel or

by SCART cables.

video signal.

video signal.

 

 

 

 

You made a video

The Mediamaster was not left on

If you make a recording from digital

recording of a digital

the appropriate channel.

satellite TV your Mediamaster has to

satellite channel and

 

be left on the channel you want to

the whole or parts of

The system is connected by

record.

the programme were

If the system is connected by SCART

not recorded.

SCART cables and the VCR is not

cables, switch the VCR to appropriate

 

in AV/EXT mode.

AV input.

 

The system is connected by RF

If the system is connected by RF

 

cables and the VCR is not set to

cables, switch the VCR to the channel

 

the channel tuned for digital

for digital satellite TV. If you have not

 

satellite TV.

tuned in the VCR you may do this first.

 

 

Please see the VCR manual for

 

 

instructions.

CA Module is not

CA module is not installed.

Check that the CA module has been

working.

CA module is not correctly

correctly inserted.

 

Contact your dealer or Service

 

inserted.

Provider.

Black picture.

CA module is inserted but not

Eject the CA module and reinsert it

 

working correctly.

again.

 

 

 

GB 26

 

 

Page 25
Image 25
Nokia 9650S owner manual Problem Solving, Problem Possible causes What to do