Nokia AS191WMBK user manual OSD Warning, English-10

EXIT

Selecting EXIT allows you exit OSD menu/ sub menu.

LANGUAGE

OSD control menus are available in nine languages.

OSD TURN OFF

The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10 - 120 seconds by 5 seconds step.

OSD LOCK OUT

This control completely locks out access to all OSD control functions without Brightness and Contrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD are locked out. To activate the OSD Lock Out function, press Ò1￿2/RESETÓ, then Ò+Ó key and hold down simultaneously. To de-activate the OSD Lock Out, press Ò1￿2/RESETÓ, then Ò+Ó key and hold down simultaneously.

EXPANSION

Selects the zoom mode.

This function works, when input signal timing is under Native Resolution.

FULL: The image is expanded to full screen, regardless of the resolution.

ASPECT: The image is expanded without changing the aspect ratio.

DDC/CI

Turns ON or OFF the two way communication and control of the monitor.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

CARBON SAVING

Show saving value of Carbon foot print.

Carbon meter value is updated each 5 min.

INPUT RESOLUTION

This function works, when user selects below special input signal timing.

AS191WM

Select resolutionÕs priority of input signal to one of the following signal: 1280x768, 1360x768, 1366x768.

AS221WM

Select resolutionÕs priority of input signal to one of the following signal: 1280x768, 1360x768 and 1366x768 or 1400x1050 and 1680x1050.

1280x768, 1360x768, 1366x768: Determines the resolution to 1280x768, 1360x768 or 1366x768.

1400x1050, 1680x1050: Determines the resolution to 1400x1050 or 1680x1050.

OSD Warning

OSD Warning menus disappear with SELECT button.

NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesnÕt have proper timing, the Out Of Range menu will appear.

English-10