Manuals / Nokia / Computer Equipment / Network Card

Nokia DSL Gateway High-Speed Internet Connection manual

Models: DSL Gateway High-Speed Internet Connection

1 43
Download 43 pages 34.24 Kb
Page 16
Image 16
If drilling holes and the use of plugs are required, do the following:

Nokia M/MW Gateways M1112, M1122, MW1112, MW1122, MW1324, MW1352

Depending on the wall material, you may have to drill holes and use plastic plugs to install the gateway on the wall. Certain wall materials do not require drilled holes or plugs.

If drilling and plugs are not required, do the following: WARNING

Before drilling and/or fixing the screws, make sure that there are no electric cables, phone cables, waterpipes or any other objects at the drilling points inside the wall. Electric cables and telephone cables carry voltages which can cause dangerous electric shocks.

If drilling holes and the use of plugs are required, do the following:

1.Drill two holes (6 mm in diameter) on the wall. The distance between the holes must be 155 mm.

2.Insert the plugs into the holes.

3.Fix the screws.

4.Mount the gateway on the wall as shown in Figure 6. Make sure the gateway is seated firmly.

If drilling and plugs are not required, do the following:

1.Fix the screws on the wall. Do not use plugs. The distance between the screws must be 155 mm.

2.Mount the gateway on the wall as shown in Figure 6. Make sure the gateway is seated firmly.

14 (40)

© Nokia Networks Oy

DN01154358

 

Nokia Proprietary and Confidential

Issue 1-0 en

Page 15 Page 17
Page 16
Image 16
Nokia DSL Gateway High-Speed Internet Connection If drilling holes and the use of plugs are required, do the following
Page 15 Page 17