Nokia N82 manual Voice and video mailboxes, Answer or decline a call, Make a conference call, 114

calls	Tip: When you have only one active voice call,
	to put the call on hold, press the call key. To
Make	activate the call, press the call key again.
	During an active call, to route the sound from the
	handset to the loudspeaker, select Options >
	Activate loudspeaker. If you have attached a
	compatible headset with Bluetooth connectivity, to
	route the sound to the headset, select Options >
	Activate handsfree. To switch back to the handset,
	select Options > Activate handset.
	To end an active call and replace it by answering the
	waiting call, select Options > Replace.
	If you have several calls active, to end them all,
	select Options > End all calls.
	Many of the options that you can use during a voice
	call are network services.

Voice and video mailboxes

To call your voice or video mailbox (network services, video mailbox available only in the UMTS network), press and hold 1 in the standby mode, and select Voice mailbox or Video mailbox.

	To change the phone number of your voice or video
	mailbox, press	, and select Tools >	Utilities >
114	Call mailbox, a mailbox, and Options		> Change
	number. Enter the number (obtained from your
	network service provider), and select OK.

Answer or decline a call

To answer the call, press the call key.

To mute the ringing tone of an incoming call, select Silence.

If you do not want to answer a call, press the end key. If you activate the Call divert > Voice calls > If busy function in phone settings to divert calls, declining an incoming call also diverts the call. When you select Silence to mute the ringing tone of an incoming call, you can send a text message without rejecting the call, informing the caller that you cannot answer the call. Select Options > Send text message. To set up this option and write a standard text message, select Tools > Settings > Phone > Call > Reject call with SMS.

Make a conference call

1.Make a call to the first participant.

2.To make a call to another participant, select Options > New call. The first call is automatically put on hold.

3.When the new call is answered, to join the first participant in the conference call, select Options > Conference.