Nokia N82 manual 149, Proxy server address Enter the address of the proxy server

Follow the instructions from your service provider.

●Access point name — You obtain the access point name from your service provider.

●User name — The user name may be needed to make a data connection, and is usually provided by the service provider.

●Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.

●Password — A password may be needed to make a data connection and is usually provided by the service provider.

●Authentication — Select Secure to always send your password encrypted or Normal to send your password encrypted when possible.

●Homepage — Depending on the access point you are setting up, enter the web address or the address of the multimedia messaging centre.

Select Options > Advanced settings to change the following settings:

●Network type — Select the internet protocol type to transfer data to and from your device. The other settings depend on the selected network type.

●Phone IP address (for IPV4 only) — Enter the IP address of your device.

●DNS address — Enter the IP addresses of the primary and secondary DNS servers, if required

by your service provider. Contact your internet service provider to obtain these addresses.

● Proxy server address — Enter the address of the proxy server.

● Proxy port number — Enter the port number of the proxy server.

WLAN internet access points

Press , and select Tools > Settings >		Edit
Connection > Access points	> Options >
or New access point.

Follow the instructions from the WLAN service provider.

●WLAN network name — Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device.

●Network status — Define whether the network name is displayed.

●WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is not needed. In an ad hoc network, all devices must use the same WLAN network name.

●WLAN security mode — Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no

Settings

149