Nokia N82 manual Flash, Scenes, Red-eye

Camera

32

To set the image as a call image for a contact, select Options > Set as contact call img. > Assign to contact. To return to the viewfinder to capture a new image, press the capture key.

Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
The camera of your device has a xenon flash for low
light conditions. The xenon flash is not available in
the sports scene and sequence mode.
You cannot take pictures if the xenon flash is not
fully charged, unless you have set the flash to Off.
When the flash is charging,			blinks on the display.
Charging the xenon flash usually takes a couple of
seconds.
The following flash modes are available for the still
image camera: Automatic (			), Red-eye (	), On
(	), and Off (	).
To change the flash mode, in the active toolbar,
select the desired flash mode.
Scenes
Scenes are only available in the main camera.

A scene helps you to find the right colour and lighting settings for the current environment. The settings of each scene have been set according to a certain style or environment. The default scene in the image mode is Auto, and in the video mode Automatic (both indicated with ).

To change the scene, in the active toolbar, select Scene modes and a scene. To make your own scene suitable for a certain environment, scroll to User defined, and select Options > Change. In the user defined scene you can adjust different lighting and colour settings. To copy the settings of another scene, select Based on scene mode and the desired scene. To save the changes and return to the scenes list, press Back. To activate your own scene, scroll to User defined, press the scroll key, and select Select.

Take pictures in a sequence The sequence mode is available only in the main camera. To set the camera to take six pictures or the desired number of pictures in sequence (if enough memory is available), in the active toolbar, select Sequence mode. To take six pictures, select Burst. To capture the pictures, press the capture key.