Nokia N82 manual Access points, 148

Settings	connection. In the UMTS network, data connections
	connection in one wireless LAN can be active at a
	remain active during voice calls.
	You can also use a WLAN data connection. Only one
	time, but several applications can use the same
	internet access point.
	To establish a data connection, an access point is
	required. You can define different kinds of access
	points, such as the following:
	● MMS access point to send and receive multimedia
	messages
	● Internet access point (IAP) to send and receive e-
	mail and connect to the internet
	Check the type of access point you need with your
	service provider for the service you want to access.
	For availability and subscription to packet data
	connection services, contact your service provider.
	Access points
	Create a new access point
	Press , and select Tools > Settings >
	Connection > Access points.
	You may receive access point settings in a message
	from a service provider. Some or all access points
	may be preset for your device by your service
148	provider, and you may not be able to change, create,
	edit, or remove them.

indicates a protected access point.

indicates a packet data access point.

indicates a WLAN access point.

Tip: You can create internet access points in a wireless LAN with the WLAN wizard.

To create a new access point, select Options > New access point.

To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.

●Connection name — Enter a descriptive name for the connection.

●Data bearer — Select the data connection type.

Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.

To be able to use a data connection, your service provider must support this feature, and if necessary, activate it for your SIM card.

Packet data access points

Press , and select Tools > Settings >		Edit
Connection > Access points	> Options >
or New access point.