Nokia N95 manual Call divert, Call barring, Hold in the standby mode

Automatic redial — Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling,

press .

Show call duration — Activate this setting if you want the length of a call to be displayed during the call.

Speed dialling — Select On, and the numbers assigned to the speed dialling keys ( — ) can be dialled by pressing and holding the key. See also "Speed dial a phone number", on page 79.

Anykey answer — Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and .

Line in use — This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode.

Tip! To switch between the phone lines, press and

hold in the standby mode.

Line change — To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

Call divert

Call divert allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.

Select which calls you want to divert and the desired diverting option. To divert voice calls when your number is busy or when you reject incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).

Several diverting options can be active at the same time.

When all calls are diverted, is shown in the standby mode.

Call barring and call diverting cannot be active at the same time.

Call barring

Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider.

Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.

Settings

Copyright © 2007 Nokia. All rights reserved. 105