Nokia N95 manual Make calls, Voice calls, Press to call the number

Make calls

Make calls

Voice calls

1In the standby mode, enter the phone number, including the area code. To remove a number, press .

For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2Press to call the number.

3 Press	to end the call (or to cancel the call attempt).
Pressing	always ends a call, even if another

application is active. Closing the slide does not end an active voice call.

To adjust the volume during a call, use the volume key on the side of your device. You can also use the scroll key. If you have set the volume to Mute, select Unmute first.

To make a call from Contacts, press , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts

are listed. To call, press .

You must copy the contacts from your SIM card to Contacts before you can make a call this way. See "Copy contacts", on page 88.

To call a recently dialled number in the standby mode,

press . Scroll to the number, and press .

To send an image or a video clip in a multimedia message to the other participant of the call, select Options > Send MMS (in UMTS networks only). You can edit the message

and change the recipient before sending. Press to send the file to a compatible device (network service).

To put an active voice call on hold while answering another incoming call, select Options > Hold. To switch between the active and the held call, select Options > Swap. To connect the active and held calls and drop yourself from the line, select Options > Transfer.

To send DTMF tone strings (for example, a password), select Options > Send DTMF. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or

a pause character (p), press repeatedly. Select OK to send the tone. You can add DTMF tones to the Phone number or DTMF fields in a contact card.

Tip! When you have only one active voice call, to put

the call on hold, press . To activate the call, press again.

During an active call, to route the sound from the handset to the loudspeaker, select Options > Activate

78Copyright © 2007 Nokia. All rights reserved.