Nokia PM-6225 manual Using Voice Commands to Operate Your Radio, To use voice commands

Using Voice Commands to Operate Your Radio

You can create voice commands that operate your radio when you speak them.

To create voice commands:

1.From the standby mode, press Menu, scroll to Settings, and press Select.

2.Scroll to Voice commands, press Select, scroll to Radio, and press Select.

3.Scroll to Radio on, Radio off, Next channel, or Previous channel, depending on the command that you want to create, then press Options.

4.Scroll to Add command and press Select.

5.Press Start and speak your command after the tone

.

Tip: You could say “Next station” or other words when creating a voice command for Next channel. The phone does not understand the words, it only remembers the sounds. The same is also true for other commands.

6.To review, change, or delete the voice command, press Options, scroll to select the action, and press Select.

To use voice commands:

Note: To use voice commands to operate the radio, the radio must be on and the phone in the standby mode.

1.From the standby mode, press and hold the key for two seconds. (The key is below Contacts).

2.Speak your command after the beep. (If a voice match is found, the phone executes the command.)

Section 2K: Additional Features 119