Nokia PM-6225 manual Turning Your Phone On and Off, Turning Your Phone Off, To turn your phone on

Turning Your Phone On and Off

Turning Your Phone On

To turn your phone on:

▶Press and hold the power button on the top of your phone for approximately two seconds.

Once your phone is on, it displays “Searching for Service” that indicates your phone is searching for a signal. When your phone finds a signal, it automatically enters the standby mode—the phone’s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to the standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for

PCS Service by pressing any key (when your phone is turned On).

Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

Turning Your Phone Off

To turn your phone off:

▶Press and hold for two seconds until you see “Goodbye” on the display screen.

Your screen remains blank while your phone is off (unless the battery charger is connected).

Section 2A: Your PCS Vision Phone - The Basics 16