Norcold 442, 483, 463, 453, 482 Side Wall Clearance - Figure, Upper Side Wall Exhaust Vent For Mod

Side Wall Clearance - Figure 4

1. Figure 4 illustrates the requirement to minimize the clearance at the sides of the refrigerator. The clearance is not to exceed 1/2 inch. Side clearances in excess of 1/2 inch must be either

B

filled with Fiberglas batting or blocked with pan- eling, etc.

1

1

Figure 4

Upper Side Wall Exhaust Vent For Mod-		1
els 452, 453, 442, and 443 ONLY
Figure 5		2
1.	Area above refrigerator blocked (baffled) off to
	prevent trapping of hot air above the refrigera-
	tor.
2.	0 - 1/4 inch clearance at the top of the refrig-
	erator.
3.	Upper Side vent Location. Floor level to top of
	opening. 38 1/8" for models 442 & 443. 50 1/2"	6
	for models 452 & 453. See Table 1 for vent
	dimensions,
4.	0 - 1 inch clearance at the rear of the refrigera-
	tor. (See Figure 3 when clearance exceeds 1
	inch).
5.	Intake (lower) vent installed flush with the sur-	Figure 5
	face on which the refrigerator is mounted.
6.	O inch clearance at bottom of refrigerator.

4

3

5

			1
Top and Side Wall Clearance-All Models
Figure 6
1.	Top baffle fills the total area above the refrig-	2	2
	erator an is properly aligned with the side wall
	construction.
2.	0 - 1/2 inch at the sides of the refrigerator.

Figure 6

7