Locate the Reed Switch (10) and the Magnet (7) on the left side of the Pulley (8). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 3 mm (1/8 in.). If necessary, loosen the Screw (27), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood (not shown), making sure the screws are in the same holes from which they were removed. Run the treadmill for a few minutes to check for a correct speed reading.

3 mm

8

27

 

10

7

Top

 

View

 

PROBLEM: The walking belt slows when walked on

SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.).

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 7 to 10 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

7–10 cm

Rear Roller Bolts

c. If the walking belt still slows when walked on, see the front cover of this manual.

PROBLEM: The walking belt is off-centre or slips when walked on

SOLUTION: a. If the walking belt is off-centre, remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left rear roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centred.

a

b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each edge of the walking belt 7 to 10 cm (3 to 4 in.) off the walking plat- form. Be careful to keep the walking belt centred. Plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

27

Page 26 Page 28
Page 27
Image 27
NordicTrack NATL81205.0 manual Top, Problem The walking belt slows when walked on
Page 26 Page 28

NATL81205.0 specifications

The NordicTrack NATL81205.0 is a standout treadmill designed to cater to fitness enthusiasts seeking an advanced exercise experience in the comfort of their own home. This model features a host of impressive specifications that support effective workouts for users of all fitness levels.

One of the main features of the NATL81205.0 is its powerful 3.0 CHP motor, delivering consistent performance for running or walking sessions. This motor ensures smooth transitions between speeds and inclines, making it a reliable choice for both casual users and serious runners.

The treadmill is equipped with a spacious running surface measuring 20 x 60 inches, providing ample room for users to stride comfortably. The belt is designed for durability and performance, ensuring it can withstand extensive use without compromising on quality.

An exceptional highlight of the NATL81205.0 is its innovative FlexSelect cushioning system, which allows users to adjust the level of cushioning on the running deck. This technology supports natural movement while minimizing the impact on joints, enhancing comfort during workouts.

Another notable feature is the incline capability, reaching up to 15%, which adds variety to workouts and boosts calorie burn. The automatic inclination feature allows users to change grades with a touch of a button, facilitating a more engaging and challenging exercise experience.

The treadmill incorporates a 10-inch Smart HD touchscreen display that provides clear visibility for tracking workout metrics such as time, distance, speed, calories burned, and heart rate. The console is also equipped with Bluetooth connectivity, allowing users to sync their devices and access music or streaming content during their workouts.

Additionally, integration with iFit technology opens up a world of possibilities. Users can experience interactive personal training with various live and on-demand workouts led by professional trainers. The iFit membership provides access to a library of global workouts, including scenic runs through exotic locations, which enhances motivation and keeps workouts fresh.

Finally, the NordicTrack NATL81205.0 is designed for easy folding and storage, featuring a space-saving design. It also comes with built-in speakers and a cooling fan, making it a convenient and comfortable choice for various fitness routines.

In summary, the NordicTrack NATL81205.0 is a top-tier treadmill that stands out with its powerful motor, impressive cushioning technology, sophisticated touchscreen interface, and integration with iFit. It is an investment in health and fitness, capable of accommodating a range of workout preferences and intensities. Whether you are training for a marathon or simply aiming to improve your fitness level, this treadmill is equipped to meet your needs.
Top Page Image Contents