NordicTrack NCTL09992 user manual HOW to Connect Your Home Stereo, Audio 5mm Cable Adaptor

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adaptor. Plug the adaptor into the LINE OUT jack on your stereo.

A	CD
	VCR
	Amp	LINE OUT
		LINE OUT
Audio	adaptor
Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adaptor.

Plug the adaptor into an RCA Y-adaptor (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the RCA Y-adaptor. Plug the RCA Y-adaptor into the LINE OUT jack on your stereo.

B	CD
	VCR
	Amp	LINE OUT
		RCA
Audio	Y-adaptor
	adaptor
Cable
Wire removed from
LINE OUT jack

HOW	TO CONNECT YOUR COMPUTER
Note:	If	your computer has a 3.5mm LINE OUT jack,

see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into a 3.5mm Y-adaptor (available at electronics stores). Plug the Y-adaptor into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Y-adaptor.

B
	PHONES
Audio	3.5mm
Cable	Y-adaptor
Headphones/Speakers

17